8/17 Kew St, Welshpool WA 6106, Australia
Mon – Fri: 9am – 5pm, Sat: 9am – 1pm
HomeShopGARAGE & GATE REMOTESB&DB&D TB5v2 Genuine Garage Remote
Save $20

B&D TB5v2 Genuine Garage Remote

$109 $89

Out of stock

SKU: GAR-G-007
Product Code: 1245
SKU: GAR-G-007 Category:

    PRODUCT DESCRIPTION

    • All new B&D Control-A-Door openers now feature unique Tri-Tran multi frequency operation. Tri-Tran has an automatic frequency change function, with each of its three frequencies transmitted having a much tighter bandwidth.
    • The frequency changes every 22mS during a transmission and reception. So if there is another signal interfering on a part of this frequency spectrum, the automatic change ensures the signal still reaches the opener.
    • This makes Tri-Tran up to one thousand times better, in terms of in band interference rejection, than a typical FM receiver, and up to a million times better than some AM receivers.

    PRODUCT SPECIFICATION  

    • Like: RMDB02
    • Number of Buttons: 4
    • Battery: CR2032
    • Colour: Red Body & Black Buttons

    Compatibility:

    • TB5v2 (Remote)
    • TB6 (Remote)
    • RDO-1V3 RAP (Roll-A-Pro)
    • RDO-1V4 PD
    • SDO-4V1 (PanelPro)
    • SDO-2V2 ADV
    • SDO-2V2 PD
    • SDO-2V3 PGY (Prodigy)
    • SDO-3V2 CADS (Controll-A-Door S)
    • SDO-3V2 WE CAD S
    • SDO-6 (Secure)
    • SDO-7 (Smart)

    Remote Programming Procedure

    Programming New Remote to Receiver

    1. Press and hold SW1 (for channel 1) or SW2 (for channel 2)

    on the receiver board (garage door motor). The LED D1 will

    start to flash.

    1. Press the remote button you would like to use to control the

    device for two seconds.

    The LED will start to flash faster.

    1. Release the remote button and pause for two seconds. Press

    the same button again for two seconds. The LED will stay on

    for a second and then turn off.

    1. Release SW button.

    Deleting a Single Remote from Receiver

    1. Press and hold SW1 (for channel 1) or SW2 (for

    channel 2) on the receiver board (garage door

    motor.) The LED D1 will start to flash.

    1. Press the transmitter button you would like to

    remove from receivers’ memory for two seconds.

    The LED will start to flash faster.

    1. Release the transmitter button and pause for two

    seconds. Press the same button again for two

    seconds. The LED will slowly flash two times.

    1. Release SW button.

     

    Deleting All Remotes from Receiver

    1. Turn the power off to the receiver (garage door motor.).
    2. Press and hold SW1 button.
    3. While holding SW1 turn power on again. After 15 seconds the

    Coding LED will light up to indicate that the receiver’s memory

    has been cleared.

    1. Release SW1. All the stored codes should now be deleted.

     

    Perth Car Keys
    Perth car keys are the car key experts, whether you need a spare key or you have lost your only car key. We happy o help you any day of the week.
    Business license number MRB5675
    ABN 27 537 306 194
    FIND LOCATIONS
    Perthcarkeys.com.au ©2021 | All Rights Reserved.

    X