Remote programming procedure

  1. Enter the vehicle and CLOSE the drivers door.
  2. Insert the key into the ignition lock.
  3. OPEN the drivers door.
  4. Turn the ignition key from the OFF to the ON position 3 times, ending in the OFF position.
  5. CLOSE and OPEN the drivers door twice, ending in the open position.
  6. Wait 5 to 8 secs.
  7. Turn the ignition key to the ON and OFF position twice.
  8. Remove the key from the ignition.
  9. Close the drivers door.
  10. Wait for the hazard lights to flash 3 times (indicating programming mode).
  11. Press the UNLOCK button 3 times on the remote control quickly.
  12. Hazard lights will blink once to indicate successful programming of the remote control.
  13. Repeat step 11 to 12 for each extra remote control to be programmed.
  14. Insert the ignition key in the ignition lock and turn the key to the ON position.
  15. The hazard lights will flash 3 times indicating the end of the programming mode.
  16. OPEN and CLOSE the drivers door.
  17. Test remotes.